ADP5250 - 1GS/s 100MHz Mixed Signal Oscilloscope, Function Generator, Power Supply, and DMM

• Analog Inputs:
  • Used in the Oscilloscope, Data Logger, Network Analyzer, Spectrum Analyzer, and Impedance Analyzer
  • Two analog input channels accessible via front panel BNC connectors
  • Channel type: single ended
  • Analog bandwidth: 100 MHz @ -3 dB
  • 8-bit resolution
  • Max sampling rate: 1 GS/s single channel
  • Maximum input range: 40 V peak to peak
  • AC or DC coupling
  • Maximum record length: 1 MS per channel
  • Front panel connector generating a 5 V, 1 kHz, square wave for convenient compensation of BNC oscilloscope probes

  Analog Outputs:

  • Used in the Waveform Generator, Impedance Analyzer, and Network Analyzer
  • One channel accessible via a front panel BNC connector
  • 14-bit resolution
  • AC amplitude (max): ±12 V
  • Maximum analog bandwidth: 5 MHz @ -3 dB
  • Maximum sampling rate: 125 MS/s
  • Software-switchable filter: 36 MHz lowpass, 7-pole, elliptical

  Power Supplies:

  • Digital supply: 3.3 V, 20 mA
  • DC power supplies:
    • 0 to 6 V variable, 1 A max current
    • 0 to 25 V variable, 500 mA max current (isolated)
    • 0 to -25 V variable, 500 mA max current (isolated)

  Digital Multimeter:

  • Used in the DMM instrument
  • Functions: DC voltage, AC voltage, DC current, AC current, resistance, diode, continuity
  • Resolution: 5 1/2 digits
  • Sample rate 5 S/s
  • Input protection:
    • Resistance, diode: up to 300 V DC
    • DC and AC voltage: up to 300 V DC or 265 VAC (rms) 400 V AC (peak)
    • DMM A current connector fuse: internal ceramic fuse, 10 A 250 V, time-delay, 5 x 20 mm, T 10 A H 250 V
    • DMM mA current connector fuse: internal ceramic fuse, 1.25 A 250 V, time-delay, 5 x 20 mm, T 1.25 A H 250 V
    • Maximum common-mode voltage: 300 V DC or AC (rms)

Digital Inputs:

• Used in the Logic Analyzer
• Channels: 32
• Input voltage: 0 V to 5 V
• Input threshold: 0 V to 2 V
• Max sampling rate: 1 GS/s
• Typical record length: 1 MS

Digital Inputs and Outputs:

• Used in the Static I/O instrument
• Channels: 8
• Input logic standard: 5 V compatible TTL
• Output logic standard: 3.3 V LVTTL

Advanced Triggering:

• Trigger sources: oscilloscope analog channels, function generator start, digital inputs, digital I/O, power line frequency, external trigger
• Trigger modes
  • Normal, auto, force, single
• Analog trigger
  • Edge with hysteresis
• Digital trigger
  • Edge, level, pattern, glitch
• External trigger:
  • 5 V compatible TTL input or 3.3V LVTTL output
  • 4 mA drive strength

Connectivity:

• Device to computer: USB 2.0 Hi-Speed

Datasheet