EX1200, EX7000 Driver/Firmware Release Notes

v3.12.26
-----
Switch IVI (both 32-bit and 64-bit versions) and Linux drivers
 - Added new property to get the list of relays and releasing both 32-bit and 64-bit VTEXSwitch IVI Drivers as 3.12.26 version

v3.12.25
-----
EX1200 Upgrade images
 - Fixed the DmmSfp to correctly wait until the Fluke calibrator has settled before taking measurements when being calibrated.

v3.12.24
-----
EX1200 Firmware card upgrade image/IVI driver/Linux driver - Multifunction
  - Modified the FPGA to give an error signal upon receiving trigger when NO new data available and SFP/Lib layers will treat the measurement as zero based on the error signal

v3.12.23
-----
EX1200 Upgrade images, VTEXSystem IVI/LV drivers
  - Fixed the issue with ACV measurement in DMM SFP
  - Added the feature to support saving the configuration and loading it back from non-volatile memory and removed the earlier way ("Default=") of storing source/invertedsource list.

v3.12.22
-----
Non-Switch Card upgrade image, VTEXMultifunction IVI/Linux driver
  - Fixed the issue with readings when there is no input in FPGA and IVI driver
  - Added a missing case to calculate time interval measurement and corrected dutycycle caluculation

v3.12.21
-----
Non-Switch Card upgrade image
  - Fixed the issue with ReadLatest by not allowing the write during the read in progres to the block memory

v3.12.20
-----
Switch Card upgrade image
  - Modified common code between scanner and switch SFP's.

v3.12.19
-----
EX1200 Firmware/IVI driver/Linux driver/LV wrapper
  - Releasing the firmware, Comparator IVI/Linux driver and Comparator LabVIEW wrapper as 3.12.19 version
  - Fixed the backplace trigger level option - active low or active high
  - Added ex1200-7416m1 model to support 50.0V range instead of 100.0V in ex1200-7416

v3.12.18
-----
Switch IVI Driver
  - Releasing both 32-bit and 64-bit VTEXSwitch IVI Drivers as 3.12.18 (non-beta) version

v3.12.17 Beta
-----
EX7000 Firmware
  - Added support for new relays

v3.12.16 Beta
-----
Switch IVI Driver
  - Releasing VTEXSwitch IVI Driver as 64-bit version

v4.0.0 Beta
-----
VTEXSwitch LV Driver
  - Updated all the vi's to work with 64-bit machine.

v3.12.15
-----
Scanner IVI Driver
  - Fixed the problem with driver going into indefinite loop while ethernet cable is removed.

v3.12.14
-----
Switch LV Driver
  - Fixed the problem with VTEXSwitch LabVIEW wrapper opening with older version of LabVIEW.

v3.12.13
-----
Switch Firmware
  - Fixed backplane connections with the EX1200-4265 switch card.

v3.12.11
-----
EX7000 Firmware
  - Fixed a problem saving odometer values beyond 4 RDBs

v3.12.10
-----
Switch Driver/Firmware
  - Added the support for EX1200-4265 card.

v3.12.9
-----
EX1200 Firmware
  - Added support for storing the BPL_INSFAIL configuration in NV RAM.
  - Releasing Fgen card upgrade image - fix in SFP calibration

v3.12.8
-----
NonSwitch Card Upgrade Image - Multifunction
  - Fixed the problem with setting the output direction for dio channels in SFP.
  - Fixed the problem while writing the direction in FPGA by increasing the latch enable time.

v3.12.7
-----
RTDSimulator Card Upgrade Image
  - Updated the Pulsed current settling time with 1.6 milli-seconds in FPGA.

v3.12.6
-----
RTDSimulator Driver/ Firmware
  - Added the Pulsed Current Excitation Feature.

Switch Driver/Firmware
  - Added the support for EX1200-6111 card.

v3.12.5
-----
EX7000 Firmware
  - Added Support for RelComm RMT-12S6DB (SP12T) relay.
  
Switch Firmware
  - Fixed occasional self-test failure with EX1200-2087A switch card.
  
v3.12.4
-----
Switch Driver/Firmware
  - Support for EX1200-2087A switch card relay built in self test feature.

Switch Card upgrade image
  - Added Support for relay built in self test feature in the EX1200-2087A FPGA.

v3.12.3
-----
EX1200 Firmware, IVI, LV and Linux images
  - Added 7008 RTDSimulator in the EX1200 family.
  - Releasing all the EX1200 related images as 3.12.3 version.

v3.12.2
-----
Fgen Card upgrade image
 - Fix for Calibration COnstants for 20mA range in SFP

v3.11.4
-----
EX7000 Firmware
 - Updated with matching SFP.

v3.11.3
-----
EX7000 Firmware
 - Added library and image support for amplifier modules.

v3.10.6
-----
Comparator Card upgrade Image
 - Fix for FPGA bit file for RJR cards

v3.10.5
-----
Switch Driver
 - Fix for verify relay state on latching relays

v3.10.3
-----
EX1200 Firmware
 - Resolved an issue with the ex1200-6301 and -6301T cards.

v3.10.2
------
EX1200 Firmware
 - Resistance tolerances updated for revision B boards.

v3.10.1
------
VarRes Driver/Firmware
 - Previously this driver had a dependence on VISA to be installed. Since VISA is not used in this driver, it was removed.

DIO Driver/Firmware
 - The maximum pattern output rate has been permanently reduced to 2MHz. This is a specification change for the card.
 - The card can now generate many more clock frequencies, including many between 1.25MHz and 2MHz.
 - Pattern output now works reliably at all supported frequencies.

Fgen Driver/Firmware
 - The Marker output is now correctly syncronized to the start of
   sample.  (It was previously generated at the end of sample.)

 - Standard waveforms (Square, Triangle, RampUp, RampDown) were
   incorrectly shaped and/or had the wrong frequency for low
   frequencies.

EX7000 Firmware
 - Now more robustly handles incorrect and invalid scpi commands.

System Driver
 - Updated supported models.

Multifunction Driver/Firmware
 - Max average count corrected from 255 to 256 in FPGA
 - DMM connectivity of Comparator (DAC) changed according to Hardware changes
 - Fixed the RPM measurement issue in missing tooth mode.
 - Fixed the Frequency and pulse width measurement issue when in moving average mode (Average Repeat off)
 - Fixed the DAC Channel reset issue by Reset command.

v3.9.8
------
EX1200 Firmware
 - Added support for user-replaceable DMM.
 - Added support for EX1268A chassis.

v3.9.5
------
Switch Driver
 - Fix for linear (new-style) attenuator definitions.

v3.9.3
------
Switch Driver
 Rebuild to include a change intended to be in v3.9.2
 - Fix fractional attenuator dB settings

v3.9.2
------
Switch Driver/Firmware
 - Fix support for YIG filters
 - Fix odometers display in the SFP
 - Fix fractional attenuator dB settings

Fgen Driver/Firmware
 - The Arbitrary.Configure() and Sequence.Configure() methods
   are now working properly on channels 2,3,4 on the 3604.


v3.9.1
------
Switch Driver/Firmware
 - Fix support for matrix relays in SetPath()
 - Add support for YIG filters


v3.9.0
------
All Drivers 
 - Driver Sessions are now closed properly when simulating.

Dio Driver/Firmware
 - Simulating mode no longer requires a model number.
 - EndState now works properly.
 - Pattern Acquisition Fifo can now be cleared properly.

Fgen Driver/Firmware
 - The 3608 (and 3604) is now recognized in EX12x7, EX12x8, and EX12x9
   devices.
 - Autorange now works properly for Arbitrary and Sequence
   OutputModes.  Previously, the 20V range was always selected.
 - Initial values of arbitrary waveform generation were
   incorrect. Fixed.
 - Sometimes Arbitrary waveforms would generate before the first
   trigger in a triggered OperationMode.  Fixed.
 - Two triggers were needed to advance in Sequenced OperationMode.
   Fixed.
 - Initial generation of Square waves had extra samples.  Fixed.
 - Arbitrary.Configure() and Sequence.Configure() would not select the
   initial range correctly when in autorange mode. Fixed.

Scanner Driver/Firmware
 - When calling Scanner::Read, timeouts over 60 seconds now work properly.
 - Several new APIs were added to give customers more flexibility when
   debugging Scanlists. This breaks backwards compatibility.
 - The DMM::Trigger::Multipoint API was not useful in Scanner and was removed.
 - Driver help file updated to have proper EBNF grammar for scanlists.
 - Drastically improved maximum possible scan speed.

Switch Driver/Firmware
  - Corrected ex1200-4120, 4148, and 4164 configuration files

VarRes Firmware
 - A change was made to the firmware to correct submitted resistances for the
   presence of a 1GOhm parallel resistance. This will result in higher
   accuracy.

EX7000 Firmware
  - Closing a vxi11 connection without calling destroy_link() no
    longer prevents a scpi connection from being opened.

Known issues:
 - The mark output is currently generated one sample late, and not
   generated at all at the last sample of a waveform. (Fgen)
 - Scanner driver breaks backward compatibility.

v3.8.2
------
Switch Driver
 - Change the value returned from CanConnect() when both channels are the same


v3.8.1
------
Switch Driver
 - Fixed latching relay reset when multiple Connect() or Disconnect()
   calls are made without debouncing between


v3.8.0
------
Newly Supported Models
 - ex1200-4260
 - ex1200-4264

VarRes Driver
 - The VarRes driver now includes example programs

DIO Driver
 - Fixes an issue where DIO interfered with Scanner and the two could not be
   active at the same time.

Scanner SFP
 - Added the Scan Delay property to the SFP.

Fgen Driver/Firmware
 - The Range is now set to Autorange by default.


V3.7.0
------
Newly Supported Models
 - ex1200-7600

FGen Driver/Firmware
 - Sequenced OperationMode now supports the AsyncAdvance mode.
 - Events are fully supported.
 - Marker output is fully supported.

VarRes Driver/Firmware
 - Initial official release. 

Scanner Driver
 - Added new property, "Delay" - Delay acts as a holdoff to enforce a minimum delay
   between scan steps. Also, we now allow the use of commas in sweep steps. A comma
   indicates that the driver should disconnect the previous sweep channel and
   connect the next sweep channel at the same time.


v3.6.2
------
EX7000 Firmware
  - Add an SFP graphic for another type of SP4T relay


v3.6.1
------
Switch Driver
 - Solved issue with NI Switch Executive and the Config Store


v3.6.0
------
Newly Supported Models
 - ex1200-2007a
 - ex1200-2008h
 - ex1200-5004
 - ex1200-5006
 - ex1200-6216hv

Dio Dirver
 - VTEXDio functionality is now complete. All interfaces are implemented, and Pattern and 
   Async modes are now available.

FGen Driver/Firmware
 - Standard, Arbitrary, and Arbitrary Sequence OutputModes are supported.
 - Sine, Square, Triangle, RampUp and RampDown standard waveforms add to
   the already existing DC standard waveform.
 - StartPhase is supported on all cyclic waveforms.
 - DutyCycle is supported for Square waveform.
 - Continuous and Burst OperationModes are supported as well as the VTI
   Extensions Sequenced and SingleStep.
 - AutoRange is now supported.
 - Frontpanel, Backplane (and so any LXI trigger source), Internal and
   Software triggers are supported.
 - VTEXResult get_Name(int32_t index, VTEXString *ChannelName) is now changed to 
   VTEXString get_Name(int32_t index)

Known Issues
 - The AsyncAdvanced capability of Sequenced OperationMode is not supported at this time. (FGen)
 - Events outputs are not supported at this time. (FGen)
 - Marker output is not supported at this time. (FGen)

v3.5.0
------
System Driver
 - Solved multi-threading issues with C interface

v3.4.0 
------
Switch Driver
 - Solved multi-threading issues with C interface

v3.3.0
------
EX1200 Switch Firmware
  - Minor change to signalling on data backplane

EX1200 Non Switch Firmware
  - Resolved memory leak on reset of DIO plugin modules
  - Resolved transfer errors on data backplane

v3.2.0
------
Switch Driver
 - fixed environment variable needed for simulation

v3.1.0
------
Switch Driver/firmware
 - Cleaned up self-test error message
 - Added support for scanning current in ex1200-3001
 - Fixed example code

Scanner Driver
 - Fixed the Close() API.
 - Fixed example code

v3.0.0
------
Comparator Driver/Firmware
 - The way calibrations are applied to thresholds has changed since the previous
   release. If you are upgrading from a previous release a new calibration will
   be neccesary.

Dio Driver/Firmware
 - The version of the VTEXDio driver and firmware released under Version 3.0.0 is incomplete.
 - Normal mode operation is supported.
 - The Ports interface is supported.

FGen Driver
 - In this version of the VTEXFgen driver, only static DC operation is supported. 
 - This is the DC waveform in StandardWaveform mode. 
 - The ex1200-3604 is now supported.
 - Autorange is not available at this time. Only fixed ranges are supported.

Scanner Driver
 - Currently the LibScanner driver supports all varieties of Switch card as well 
   as the integrated DMM in the EX1200 chassis. Future support is planned for 
   other card models.

Known Issues
 - There is not currently a calibration application built into the Soft Front
   Panel for Comparator cards. This is planned in a future release. (Comparator)
 - None of the calls that work in Async mode (InitAsync, etc) are supported. (DIO)
 - There is nothing preventing users from accessing unsupported functionality in this release. 
   Users must ensure they are only using supported functionality as listed in this release note or proper operation is not guaranteed. (DIO)



Prior to v3.0.0
------
Supported Models
 - ex1200-2001
 - ex1200-2002
 - ex1200-3001
 - ex1200-3048
 - ex1200-3048s
 - ex1200-3072
 - ex1200-3096
 - ex1200-3164
 - ex1200-3604
 - ex1200-3608
 - ex1200-4003
 - ex1200-4120
 - ex1200-4128
 - ex1200-4148
 - ex1200-4164
 - ex1200-5001
 - ex1200-5002
 - ex1200-6101
 - ex1200-6102
 - ex1200-6216
 - ex1200-7416
 - ex1200-7500
